Nov 10, 2010 Written by 
10 November 2010
Given the huge demand for fuel and power, energy rates are expected to surge in the near future. To save on energy expenses, there is a significant push towards deploying green methods in building construction. Fitting a secondary glazing panel to an existing window (retrofit double glazing) is one of the easiest methods for curbing energy consumption.

Magnetite retrofit double glazing is specially manufactured to enhance the thermal properties of the building without reducing the visible light passing through the windows.

However, in order to buy good quality secondary windows and to fit them properly into the building structure, it is essential to gain some knowledge of window insulation systems.

Prior to retrofitting a secondary window system, it is essential to test their thermal insulation properties. The insulation testing standards used for windows are different from those used for general building material. Usually, the resistance of a material against heat loss is defined by its R-value. This value is considered as the benchmark in determining the insulation properties of building materials used to construct walls and roofs. However, it is not the perfect standard to judge the insulation properties of materials used in the construction of windows. This is due to the fact that unlike walls and roofs, windows have to allow solar light to pass through them. Thus, for windows, one should consider the U-value as the standard unit to test thermal characteristics. It measures the rate of transfer of heat through a solid material. Thus, while buying a window, look for a low U-value.

Other properties that help in the selection of energy-efficient secondary panel windows are:

  • Resistance to Condensation: The condensation effect in a closed environment deters thermal control. This unit determines the property of a solid material to curb the condensation process. The higher the condensation resistance, the better the product.
  • Air leakage/infiltration: It is hard to search for a secondary panel window product with no air leakage. Most products allow some amount of air to pass through. The market needs to be scanned for a product with minimum air leakage. Look for high quality seals and ensure the frames have a snug fit when installed. Use cavity closers to eliminate the possibility of air leakage after fitting windows.
  • Visible transmittance: It is the property of a solid material to allow visible light to pass through.
  • Solar heat gain coefficient: It defines the property of a product to block solar heat. The lower the coefficient, the higher is the ability to block heat. To exercise high control over the temperature inside the building, use a product with a low heat gain coefficient.

There are many products on the market and it is important to spend time choosing the right one for your budget and time frames.

Rate this item
(0 votes)
Magnetite Australia

Magnetite Australia is specialises in providing acoustic and thermal insulation for existing windows and doors. Our double glazing systems have been independently tested by the National Acoustic Laboratories and the Window Energy Rating Scheme (WERS) in line with National Fenestration Rating Council (NFRC) regulations.

As Seen on:
Selling Houses Australia
HIA Certified
HIA Certified
ECO Certified
ECO Certified
AWA Certified
AWA Certified
Energy Certified
Energy Certified
Business Award
Business Award