Come and play with our new sensor display at the 2014 HIA Sydney Home Show

Posted on Jun 18, 2014 in Blog

This year, we will feature our new and latest sensor display, which will enable visitors to listen and feel the benefits of Magnetite retrofit solutions. Magnetite will showcase the entire range of Magnetite products at the HIA Sydney Home Show.

Visit us at stand E47 and experience our new sensor display. Our expert will be available throughout the show to assist with your noise and thermal concern and answer any questions you may have.The 2014 HIA Sydney Home Show runs from Thu 19th June to Sun 22nd June at Sydney Showground, Sydney Olympic Park.

For more details, please click here.

See you at the 2014 Sydney HIA Home Show!

Conduction
Heat moving through an object (i.e. heat will travel through an aluminium, or steel frame more easily than through a timber or PVC frame).
Radiant heat
Heat from the direct sun. It can pass through space until reflected or absorbed.
Convection
Heat flow resulting from air movement e.g. either 'natural' convection - warm air rises, or 'forced' convection - a breeze by a window, both can result in a draught by a window.
Infiltration
Air leaks around the frame, around the window sash and through the gaps in the movable window parts.

When evaluating your options to improve the thermal performance of your windows, the following double glazing key performance criteria should be considered:

U-Value (Uw) represents heat transfer through a window, irrespective of direct sunlight. The lower a window’s U-Value, the better the insulation performance.
Solar Heat Gain Coefficient (SHGC) measures the solar energy that passes through glazing. The lower the SHGC, the less solar heat is transmitted through a window.
Air Infiltration or leakage measures the rate at which air passes through gaps in window joins and seals. The lower the air infiltration, the better a window’s energy performance.

The Window Energy Rating Scheme (WERS) Thermal Performance

Aluminium Frame Windows

Glazing Type	Cooling Stars	Heating Stars	Cool%	Heat%	Uw	SHGC
Single glazed 3mm clear glass*					7.4	0.77
Single glazed 3mm clear glass & 4.5mm Magnetite			35%	59%	2.9	0.67

Timber Frame Windows

Glazing Type	Cool%	Heat%	Uw	SHGC
Single glazed 3mm clear glass*	20%	28%	5.5	0.69
Single glazed 3mm clear glass & 4.5mm Magnetite	37%	61%	2.6	0.66
Single glazed 3mm clear glass with Solartite** and 4.5mm Magnetite	76%	45%	1.8	0.20

*WERS standard typical industry window
**Solartite is a range of high performance window film. The window tested above has Solartite’s low-e film.

Magnetite vs Traditional Double Glazing – What the experts says

Winter - the ideal situation is to let in as much of the sun's heat and then trap it inside to maintain a comfortable environment in your home or office. This will also significantly reduce heating costs and saves you money. The ideal window for winter will have a high SHGC to let the sun's heat in and a low U-Value to prevent the heat from escaping. Clear windows without shading films are better suited for winter climates.

Compared with traditional double-glazing, Magnetite’s double-glazing solution can provide better results during winter or for cold climate areas such as Canberra, the Adelaide Hills and Blue Mountains.

Magnetite's clear acrylic window panels allow the direct heat from the sun's rays to enter the building and once inside, Magnetite's superior magnetic seals retain the heat, giving Magnetite an advantage over conventional operating windows.

Glazing Type	Cooling Stars	Heating Stars	Cool%	Heat%	Uw	SHGC	AI
Double Glazed 3mm clear glass/12mm air gap/3mm clear glass IGU (Insulated Glass Unit)*			40%	55%	3.0	0.61	5.0
Single glazed 3mm clear glass & 4.5mm Magnetite			37%	61%	2.6	0.66	0.5

*WERS standard typical industry window

Summer - the ideal situation is to minimize the heat coming in from outside and prevent the cool air inside from escaping through the window. This will make your home more comfortable and reduce your air-conditioning costs. The ideal window for summer, or for a large west-facing window, will have a low SHGC to limit the heat from the sun's direct rays, as well as, a low U-Value to prevent the heat in the air outside from moving through the window and warming the cool conditioned air inside. It is better to have a shading film on the first (outer) glass pane to limit the heat that enters the double glazed unit.

The combination of Magnetite retrofit double glazing and Solartite outperforms the traditional insulated glass unit for hot climate. Magnetite fit over an existing window with reflective film will give better summer heat control than a double-glazed window with supertoned glass.

The Magnetite system stops the conduction and convection of heat better than glass windows giving superior results for summer conditions. Combined with a film or a shading device, Magnetite is the ideal solution for the hot Australian conditions.

Glazing Type	Cooling Stars	Heating Stars	Cool%	Heat%	Uw	SHGC	AI
Double Glazed 5mm Supertoned glass/6mm air gap/5mm clear glass IGU (Insulated Glass Unit)*			54%	425%	3.30	0.461	5.0
Single glazed 3mm glass Solartite** and 4.5mm Magnetite			73%	38%	2.4	0.19	0.5

*WERS standard typical industry window
**Solartite is a range of high performance window film. The window tested above has Solartite’s low-e film.

Click here to view pdf version of Magnetite WERS test result.

Noise Reduction Technical Data and Results

Proven Results

Noise pollution is one the biggest problems faced in the cities today, particularly in a high-density living. Unwanted noise can be responsible for sleep loss and lack of concentration. This can lead to a deterioration of health through increased stress levels, headaches, high blood pressure and loss of hearing.

Noise penetrates windows through leaky seals or vibrations through the window structure. To reduce noise, a window should minimise air infiltration, hold enough weight to limit vibration and allow a large air cavity. This cavity, or air gap, is the key to secondary glazing.

Expert Advice:

CSIRO Research by John Davy shown an air cavity can effectively enhance sound insulation performance. The larger the air cavity the more noise the window system can reduce. Results show a wide air gap of 100-125mm will improve sound insulation by an average of 7dB(A) more than windows with a narrow gap of 8-13mm.

Window or Glass Door Type	Total Glass Thickness (mm)	Air Cavity Thickness (mm)	Sound Insulation (dB)
Single Glaze 3mm	3	0	23
Single Glaze 6mm	6	0	27
Double Glaze Narrow Gap	9-12	8-13	31
Double Glaze Wide Gap	9-12	100-125	38

The human ear is less sensitive to low frequency sound. According to a study released by the CSIRO, the human ear needs a change of 3dB to detect a difference in noise levels and the human ear perceives a change of 10dB as a doubling or halving of the noise level.

If you double the thickness of glass in a window the noise level will decrease by 3dB the least amount possible to make a difference. If the glass is laminated there is no perceived difference in noise reduction.

National Acoustic Laboratory Testing:

Working with the principles of noise transfer, Magnetite® and Soundtite are designed for high performance, which is achieved by combining air tight seals with the ability to maximize an air cavity and the flexibility to vary glazing thickness to suit. Magnetite® is excellent at reducing general noise such as busy roads, commuter trains and noisy neighbours. Whereas, Soundtite works well to combat low frequencies noise such as garbage truck, freight trains or airplane during take-off and landing.

Test Code	Material Tested	Rw*	Improvement
ATF 707 (test window)	Aluminium sliding window, 3mm float glass with mohair seals	23	N/A
ATF 709	Test window, 100mm air gap and Magnetite System (4.5mm acrylic panel)	35	52%
ATF 1507	Test window, 100mm air gap and Magnetite System (10.0mm acrylic panel)	39	70%
ATF 817	Test window, 100mm air gap and Soundtite (6.38mm laminated glass)	41	78%

*The Weighted Sound Reduction Index (Rw) is a measure for sound insulation performance of a single building element such as windows. The higher the Rw rating, the better the sound insulation.